Thiết bị Scavini hóa nghiệm xăng dầu
Scavini là hãng thiết bị nổi tiếng tại Ý , thành lập năm 1957 . Chuyên về lĩnh vực Dầu khí theo các tiêu chuẩn: ASTM, IP, DIN, AFNOR, CEC, IEC, IS, JIS…
- Máy kiểm tra điểm chớp cháy ASTM D92, D93
- Máy kiểm tra độ ổn định oxy hóa ASTM D525 – D873
- Máy kiểm tra độ tạo bọt ASTM D892 ….
Manual and automatic Flash Point Testers (Pensky Martens, Cleveland and Abel)
Cold Properties analyzers (Cloud, Pour and Freezing Point, CFPP)
Oxidation Stability on Diesel fuels, Steam Turbine Oil, Lubricating Oil etc.
Demulsivity and Foaming Testers
Low and High-Temperature viscosity baths
Bitumen (Ductilometer, Penetrometer, RTFOT & TFOT)
Grease (Penetrometer, Grease Workers, Dropping Point Tester)
Gasoline and Aviation Fuel (Oxidation Stability, Air and Steam Jet Equipment)
Lubricants (Flash Point, Oxidation Stability)
Antifreeze (Glassware Corrosion Test, Freezing Point)
| Automatic Demulsivity Tester | Cloud and pour point bath | Oxidation of distillate fuel oil | Automated foaming test apparatus |
| Automatic instrument with four independent positions and CCD camera that continuously monitors the oil/water separation: pictures taken at 5-min intervals are saved and printed as test reports. | The first compact benchtop Cloud and Pour Point bath on the market with Stirling cooling compressors capable to reach -70°C. One, two, three four and five-position units available with four… | 4-6-8 or 12-place apparatus acc. to ASTM D 2274 – IP 388 with aluminum block heater and variable area dedicated flowmeters for each position. Versions with mass flow controllers and… | New equipment for tests acc. to ASTM D 892 – IP 146 with mass-flow controllers and touch-screen interface capable to automatically blow the requested air amount into the sample in… |
 |
 |
 |
 |
Phương Pháp
| Phương pháp | P/N | Mô Tả |
| ASTM D5 | AD0005-100 | THIẾT BỊ ĐO DỘ XUYÊN KIM TỰ ĐỘNG Digital penetrometer for bitumens |
| ASTM D5 | AD0005-200 | THIẾT BỊ ĐIỀU HÒA ỔN ĐỊNH NHIỆT Thermostatic bath for penetration sample conditioning |
| ASTM D6 | AD0006-100 | THIẾT BỊ XÁC ĐỊNH ĐỘ TỔN THẤT KHI ĐUN NÓNG CÁC HỢP CHẤT NHỰA ĐƯỜNG Apparatus for the determination of loss on heating on asphaltic compounds |
| ASTM D36 | AD0036-600 | MÁY KIỂM TRA ĐỘ MỀM TỰ ĐỘNG “Ring and Ball” Automatic Softening Point Tester “Ring and Ball” |
| ASTM D92 | AD0092-110 | THIẾT BỊ XÁC ĐỊNH ĐIỂM CHỚP CHÁY CỐC HỞ CLEVELAND MÀN HÌNH KỸ THUẬT SỐ Manual Flash Point Tester Cleveland with digital display |
| ASTM D92 | AD0092-600 | THIẾT BỊ XÁC ĐỊNH ĐIỂM CHỚP CHÁY CỐC HỞ TỰ ĐỘNG Automatic Flash Point Tester Cleveland |
| ASTM D93 | AD0093-120 | THIẾT BỊ CHỚP CHÁY CỐC KÍN THỦ CÔNG 3 VỊ TRÍ MÀN HÌNH KỸ THUẬT SỐ Manual Flash Point Tester Pensky Martens with digital display (Method A+B+C) |
| ASTM D93 | AD0093-700 | THIẾT BỊ CHỚP CHÁY CỐC KÍN TỰ ĐỘNG 3 VỊ TRÍ MÀN HÌNH KỸ THUẬT SỐ Automatic Flash Point Tester Pensky Martens (ASTM D 93 Method A+B+C) |
| ASTM D97 | CAPP-100 | THIẾT BỊ XÁC ĐỊNH ĐIỂM SƯƠNG VÀ ĐIỂM ĐÔNG ĐẶC ĐỂ BÀN 2 VỊ TRÍ Cloud and Pour Point benchtop cabinet – Two-position unit |
| ASTM D97 | CAPP-200 | THIẾT BỊ XÁC ĐỊNH ĐIỂM SƯƠNG VÀ ĐIỂM ĐÔNG ĐẶC ĐỂ BÀN 3 VỊ TRÍ Cloud and Pour Point benchtop cabinet – Three-position unit |
| ASTM D97 | CAPP-300 | THIẾT BỊ XÁC ĐỊNH ĐIỂM SƯƠNG VÀ ĐIỂM ĐÔNG ĐẶC ĐỂ BÀN 4 VỊ TRÍ Cloud and Pour Point benchtop cabinet – Four-position unit |
| ASTM D97 | CAPP-400 | THIẾT BỊ XÁC ĐỊNH ĐIỂM SƯƠNG VÀ ĐIỂM ĐÔNG ĐẶC ĐỂ BÀN 5 VỊ TRÍ Cloud and Pour Point benchtop cabinet – Five-position unit |
| ASTM D 97 | PPultra | THIẾT BỊ XÁC ĐỊNH ĐIỂM ĐÔNG ĐẶC TỰ ĐỘNG Pour Point automatic tester |
| ASTM D113 | AD0113-110 | THIẾT BỊ XÁC ĐỘ KÉO DÀI 100 CM Ductility machine 100 cm |
| ASTM D113 | AD0113-120 | THIẾT BỊ XÁC ĐỘ KÉO DÀI 150 CM Ductility machine 150 cm |
| ASTM D113 | AD0113-610 | THIẾT BỊ XÁC ĐỘ KÉO DÀI 100 CM MÀN HÌNH CẢM ỨNG Ductility machine 100 cm with touch screen interface |
| ASTM D113 | AD0113-620 | THIẾT BỊ XÁC ĐỘ KÉO DÀI 150 CM MÀN HÌNH CẢM ỨNG Ductility machine 150 cm with touch screen interface |
| ASTM D130 | AD0130-300 | THIẾT BỊ XÁC ĐỊNH ĐỘ ĂN MÒN ĐỒNG BẰNG PHÉP THỬ TẤM ĐỒNG – 4 VỊ TRÍ Apparatus for the determination of copper corrosion of petroleum products (4-place) with alluminium block |
| ASTM D217 | AD0217-200 | THIẾT BỊ ĐO ĐỘ XUYÊN KIM KỸ THUẬT SỐ Digital penetrometer for grease |
| ASTM D217 | AD0217-120 | THIẾT BỊ XÁC ĐỊNH ĐỘ LÚN KIM MỠ NHỜN – 1 VỊ TRÍ Elettrically operated grease working machine – single unit (220V – 50/60Hz) |
| ASTM D217 | AD0217-130 | THIẾT BỊ XÁC ĐỊNH ĐỘ LÚN KIM MỠ NHỜN – 2 VỊ TRÍ Elettrically operated grease working machine – twin unit (220V – 50/60Hz) |
| ASTM D323 | AD0323-100 | THIẾT BỊ XÁC ĐỊNH ÁP SUẤT HƠI CỦA SẢN PHẨM DẦU MỎ Apparatus for the determination of REID vapor pressure of gasoline |
| ASTM D381 | AD0381-100 | Apparatus for the determination of existent gum in fuels by jet evaporation (for Air and Steam Jet test) |
| ASTM D381 | AD0381-110 | Apparatus for the determination of existent gum in fuels by jet evaporation (for Air Jet test only) |
| ASTM D445 | AD0445-111 | Ultrathermostat for viscosity determination (Gallenkamp type) |
| ASTM D445 | AD0445-120 | Low-cost ultrathermostat for viscosity determination |
| ASTM D445 | AD0445-210 | Low-temperature bath for viscosity determination (+50 / -45°C) |
| ASTM D445 | AD0445-220 | Low-temperature bath for viscosity determination (+50 / -65°C) |
| ASTM D524 | AD0524-100 | Apparatus for the determination of Ramsbottom carbon residue of petroleum products |
| ASTM D525 | AD0525-600 | Apparatus for the determination of oxidation stability of gasoline and aviation fuels, Panel PC version – 2-place with aluminium block |
| ASTM D525 | AD0525-610 | Apparatus for the determination of oxidation stability of gasoline and aviation fuels, Panel PC version – 4-place with aluminium block |
| ASTM D525 | AD0525-620 | Apparatus for the determination of oxidation stability of gasoline and aviation fuels, Panel PC version – 6-place with aluminium block |
| ASTM D566 | AD0566-600 | Automatic dropping point tester |
| ASTM D665 | AD0665-100 | Apparatus for the determination of rust preventing characteristics of inhibited mineral oil in the presence of water – 2-place with oil bath |
| ASTM D665 | AD0665-110 | Apparatus for the determination of rust preventing characteristics of inhibited mineral oil in the presence of water – 2-place with aluminium block |
| ASTM D665 | AD0665-120 | Apparatus for the determination of rust preventing characteristics of inhibited mineral oil in the presence of water – 4-place with oil bath |
| ASTM D665 | AD0665-130 | Apparatus for the determination of rust preventing characteristics of inhibited mineral oil in the presence of water – 4-place with aluminium block |
| ASTM D665 | AD0665-140 | Apparatus for the determination of rust preventing characteristics of inhibited mineral oil in the presence of water – 6-place with oil bath |
| ASTM D665 | AD0665-150 | Apparatus for the determination of rust preventing characteristics of inhibited mineral oil in the presence of water – 6-place with aluminium block |
| ASTM D943 | AD0943-204 | Apparatus for the determination of oxidation characteristics of inhibited mineral oils – 4-place |
| ASTM D943 | AD0943-208 | Apparatus for the determination of oxidation characteristics of inhibited mineral oils – 8-place |
| ASTM D943 | AD0943-212 | Apparatus for the determination of oxidation characteristics of inhibited mineral oils – 12-place |
| ASTM D943 | AD0943-304 | Apparatus for the determination of oxidation characteristics of inhibited mineral oils – 4-place unit with touch-screen interface |
| ASTM D943 | AD0943-308 | Apparatus for the determination of oxidation characteristics of inhibited mineral oils – 8-place unit with touch-screen interface |
| ASTM D943 | AD0943-312 | Apparatus for the determination of oxidation characteristics of inhibited mineral oils – 12-place unit with touch-screen interface |
| ASTM D972 | AD0972-202 | Apparatus for the determination of evaporation loss of greases and oils – 2-place with mass flow controllers |
| ASTM D972 | AD0972-204 | Apparatus for the determination of evaporation loss of greases and oils – 4-place with mass flow controllers |
| ASTM D1177 | AFPultra | Apparatus for the determination of Freezing Point of antifreeze liquids |
| ASTM D1263 | AD1263-100 | Apparatus for the determination of the leakage tendencies of automotive wheel bearing greases |
| ASTM D1263 | AD1263-110 | Apparatus for the determination of the leakage tendencies of automotive wheel bearing greases with digital display |
| ASTM D1264 | AD1264-100 | Apparatus for the determination of water washout characteristics of lubricating grease |
| ASTM D1267 | AD1267-100 | Apparatus for the determination of vapor pressure of liquefied petroleum gases |
| ASTM D1384 | AD1384-203 | Apparatus for the corrosion test for engine coolants in glassware – 3-place, oil/water bath |
| ASTM D1384 | AD1384-206 | Apparatus for the corrosion test for engine coolants in glassware – 6-place, oil/water bath |
| ASTM D1384 | AD1384-213 | Apparatus for the corrosion test for engine coolants in glassware – 3-place, aluminium block |
| ASTM D1384 | AD1384-216 | Apparatus for the corrosion test for engine coolants in glassware – 6-place, aluminium block |
| ASTM D1401 | AD1401-100 | Apparatus for the determination of water separability of petroleum oils and synthetic fluids |
| ASTM D1657 | AD1657-100 | Apparatus for the determination of density or relative density of light hydrocarbons by pressure thermohydrometer |
| ASTM D1748 | AD1748-100 | Apparatus for the determination of rust protection by metal preservatives in the humidity cabinet |
| ASTM D1831 | AD1831-100 | Apparatus for the determination of roll stability of lubricating grease – 2-place |
| ASTM D1831 | AD1831-110 | Apparatus for the determination of roll stability of lubricating grease – 4-place |
| ASTM D1831 | AD1838-100 | Apparatus for the determination of copper strip corrosion by liquefied petroleum (LP) gases – 4-place |
| ASTM D1831 | AD1838-110 | Apparatus for the determination of copper strip corrosion by liquefied petroleum (LP) gases – 6-place |
| ASTM D1831 | AD1838-120 | Apparatus for the determination of copper strip corrosion by liquefied petroleum (LP) gases – 8-place |
| ASTM D1881 | AD1881-100 | Single-unit apparatus for the determination of the foaming characteristics of engine coolants in glassware |
| ASTM D2272 | AD2272-500 | Apparatus for the determination of oxidation stability of steam turbine oils (RBOT) and gasoline automotive engine oils (TFOUT) with touch screen interface |
| ASTM D2274 | AD2274-204 | Apparatus for the determination of oxidation characteristics of distillate fuel oil – 4-place |
| ASTM D2274 | AD2274-208 | Apparatus for the determination of oxidation characteristics of distillate fuel oil – 8-place |
| ASTM D2274 | AD2274-212 | Apparatus for the determination of oxidation characteristics of distillate fuel oil – 12-place |
| ASTM D2274 | AD2274-304 | Apparatus for the determination of oxidation characteristics of distillate fuel oil with touch-screen interface – 4-place |
| ASTM D2274 | AD2274-308 | Apparatus for the determination of oxidation characteristics of distillate fuel oil with touch-screen interface – 8-place |
| ASTM D2274 | AD2274-312 | Apparatus for the determination of oxidation characteristics of distillate fuel oil with touch-screen interface – 12-place |
| ASTM D2386 | FPultra | Freezing Point automatic tester |
| ASTM D2440 | AD2440-204 | Apparatus for the determination of oxidation stability of mineral insulating oils – 4-place |
| ASTM D2440 | AD2440-208 | Apparatus for the determination of oxidation stability of mineral insulating oils – 8-place |
| ASTM D2440 | AD2440-212 | Apparatus for the determination of oxidation stability of mineral insulating oils – 12-place |
| ASTM D2440 | AD2440-304 | Apparatus for the determination of oxidation stability of mineral insulating oils – 4-place with touch-screen interface |
| ASTM D2440 | AD2440-308 | Apparatus for the determination of oxidation stability of mineral insulating oils – 8-place with touch screen interface |
| ASTM D2440 | AD2440-312 | Apparatus for the determination of oxidation stability of mineral insulating oils – 12-place with touch screen interface |
| ASTM D2500 | CPultra | Cloud Point automatic tester |
| ASTM D97, D2500 | CPPPultra | Cloud and Pour Point automatic tester |
| ASTM D2595 | AD2595-202 | Apparatus for the determination of evaporation loss of lubricating greases and oils over wide temperature range – 2 place |
| ASTM D2595 | AD2595-204 | Apparatus for the determination of evaporation loss of lubricating greases and oils over wide temperature range – 4 place |
| ASTM D2619 | AD2619-110 | Apparatus for the determination of hydrolitic stability of hydraulic fluids (Beverage Bottle Method) – 8-place |
| ASTM D2711 | AD2711-100 | Apparatus for the determination of demulsibility characteristics of lubricating oils |
| ASTM D2872 | AD2872-100 | Apparatus for the rolling thin film oven test of bitumens |
| ASTM D4340 | AD4340-100 | Apparatus for the determination of corrosion of cast aluminium alloys in engine coolants under heat rejecting conditions – single unit |
| ASTM D4340 | AD4340-110 | Apparatus for the determination of corrosion of cast aluminium alloys in engine coolants under heat rejecting conditions – twin unit |
| ASTM D6082 | AD6082-200 | Apparatus for the determination of high-temperature foaming characteristics of lubricating oils with mass-flow controllers |
| ASTM D6371 | AD6371-100 | CFPP manual tester (to be used in conjunction with Cloud and Pour Point cabinet or other cryostat) |
| ASTM D6371 | CFPPultra | CFPP automatic tester (for jacket temp. of -34, -51 and -67°C) |
| CEC-L48-A00 | CECL48-100 | Apparatus for the determination of oxidation stability of automotive oil acc. to CEC L-48-A00 – Four place unit, aluminium block |
| CEC-L48-A00 | CECL48-110 | Apparatus for the determination of oxidation stability of automotive oil acc. to CEC L-48-A00 – Six place unit, aluminium block |
| DIN51554 | D51554-100 | Apparatus for the determination of ageing characteristics of lubricating oils (BAADER) – 6 place |
| DIN51554 | D51554-110 | Apparatus for the determination of ageing characteristics of lubricating oils (BAADER) – 8 place |
| DIN51554 | D51554-120 | Apparatus for the determination of ageing characteristics of lubricating oils (BAADER) – 12 place |
| FTMS 5308 | F53084-100 | Apparatus for the determination of corrosiveness and oxidation stability of light oils (metal strips) – 4-place |
| FTMS 5308 | F53084-110 | Apparatus for the determination of corrosiveness and oxidation stability of light oils (metal strips) – 6-place |
| FTMS 5308 | F53084-120 | Apparatus for the determination of corrosiveness and oxidation stability of light oils (metal strips) – 8-place |
| FTMS 5308 | F53084-130 | Apparatus for the determination of corrosiveness and oxidation stability of light oils (metal strips) – 12-place |
| IP 33 – IP 170 | IP0170-110 | Manual Flash Point Tester Abel with digital display |
| IP 33 – IP 170 | IP0170-700 | Automatic Flash Point Tester Abel |
| IP 227 | IP0227-100 | Apparatus for the determination of silver corrosion by aviation turbine fuels – 4-place |
| IP 227 | IP0227-110 | Apparatus for the determination of silver corrosion by aviation turbine fuels – 6-place |
| IP 227 | IP0227-120 | Apparatus for the determination of silver corrosion by aviation turbine fuels – 8-place |
| IP 375 | IP0375-100 | Hot filtration test apparatus – manual version |
| IP 375 | IP0375-110 | Hot filtration test apparatus – semi-automatic version |
| IP 375 | IP0390-100 | Heater for IP 390 test – 4-place |
Đánh giá
Chưa có đánh giá nào.