Analytik Jena là công ty phát triển và sản xuất Hệ Thống Phân Tích Chuyên Dụng Nguyên Tố C/N/S/Cl
- Analytik Jena® All Instruments
- Analytik Jena® multi EA 4000
- Analytik Jena® multi EA 5000
- Analytik Jena® multi EA 3000
- Analytik Jena® multi EA 2000
- Analytik Jena® multi X 2000
- Analytik Jena® multi X 2500
- Multi NC2100-3100
Elemental Microanalysis là nhà sản xuất đạt chứng chỉ chất lượng ISO17034, ISO17025, ISO9001: 2008 cung cấp các chất chuẩn và tư tiêu hao cho phân tích nguyên tố C, S, H, N, O hoàn toàn tương thích với các thiết bị Leco, Eltra, Horiba, Elementar, Dumatherm, Bruker nhưng với giá thành rẻ hơn nhiều lần.
Các sản phẩm Elemental Microanalysis đang được sử dụng tại các phòng thí nghiệm nổi tiếng trên thế giới
LECO®, Thermo®, Perkin Elmer®, Sercon®, Exeter®, ELTRA®, Horiba®, Elementar®, EuroVector®, Costech®, Shimadzu®, Antek®, VELP®, Gerhardt®, Analytik Jena®, Bruker®, Buchi®, CKIC®, Dionex®, Europa®, Hach®, Hekatech®, Metrohm®, Picarro®, Strohlein/Juwe®, TE Instruments, Thermo Euroglas®, TSHR®, Skalar® and many others
Multi EA Series 2000 - 3000 - 4000 - 5000
| OEM Part | Part Number | Part Description |
|---|---|---|
| 402-886.116 | B1161 | EMADrone Magnesium Perchlorate 501-171 454gm Magnesium Perchlorate 5.1. UN1475 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.050 | B1720 | Halogen absorber filling for GL14 tube (copper- and brass wool) 402-810.050 |
| 402-886.312 | B1721 | Halogen absorber filling for GL18 U-tube, o.d. = 21 mm (conditioned) 402-886.312 |
| 402-886.322 | B1722 | Halogen absorber filling (conditioned) for GL18 U-tube, o.d. = 21 mm, set of 5 pieces 402-886.322 |
| 402-886.114 | B1723 | Halogen absorber filling for straight tube 402-886.114 |
| 402-810.048 | B1724 | Special catalyst platinum, 20g 402-810.048 |
| 402-810.004 | B1725 | Activated carbon for AOX analysis,10g 402-810.004 |
| 402-810.059 | B1726 | Special catalyst platinum, approx. 80 ml 402-810.059 |
| 402-886.131 | B1727 | Calcium carbonate standard 100g 402-886.131 |
| 402-885.010 | C3201 | Combustion tube 402-885.010 |
| 402-890.134 | C3202 | Combustion tube outer diameter 16 mm 402-890.134 |
| 402-825.150 | C3204 | U-tube, o.d. = 11 mm, without filling for halogenabsorber 402-825.150 |
| 402-881.013 | C3205 | U-tube, o.d. = 21 mm for halogen absorber (without connections) 402-881.013 |
| 402-889.606 | C3212 | Combustion tube, vertical (AOX and POX) 402-889.606 |
| 402-950-019 | C5200 | Quartz combustion tube CIC Metrohm 6.7301.000 |
| 402-889.066 | C5201 | Quartz hook for ABD CIC Metrohm 6.7301.110 |
| 402-886-014 | C8130 | Ceramic Tube 402-886.014 |
| 402-889.597 | C8131 | Combustion tube for diesel exhaust particulates multi EA 5000 402-889.597 |
| 402-880.009 | C8132 | Quartz container 18 x 6 pack of 20 402-880.009 |
| 402-889.674 | C8133 | Quartz Boat 40 x 9mm 402-889.674 pack of 10 |
| C8134 | Ceramic boat for sample injection in combustion module pack of 10 | |
| 402-881.228 | E7100 | Disposable retention filter (water trap) 402-881.228 |
| 402-881.245 | E7102 | Set TC pre-filter and water trap 402-881.245 |
| 402-823.056 | E7103 | Needle 0.63 mm x 0.35 mm for all types of syringes set of 3 pieces 402-823.056 |
| 402-886.304 | E7105 | Syringe 250 ul with vent and removable needle 1x0,7,53, (for APG 60 only) 402-886.304 |
| 402-886.305 | E7106 | Syringe 500 ul with vent and removable, needle 1x0,7, 53 (for APG 60 only) 402-886.305 |
| 402-886.310 | E7107 | Septum for syringe (autosampler), 9,5 mm OD, 1 pc 402-886.310 |
| 402-886.326 | E7108 | Septa Uncut for septum-head, 17 mm, 3 PCS 402-886.326 |
| 402-889.050 | E7109 | Septa for manual TIC port, 12.5 mm, (multiN/C2100 without APG 60), 5pcs 402-889.050 |
| 402-815.830 | E7110 | Sealing ring dust trap for HT-oven, piece (34mm x 4 mm) 402-815.830 |
| 402-881.108 | E7113 | O-ring, i.d. = 4.5 mm x 1.5 mm (oxygen supply/output V1) 402-881.108 |
| 402-884.005 | E7115 | Pump hose for peristaltic pump,waste 402-884.005 |
| 402-885.011 | E7116 | Pump hose for peristaltic pump (acid) 402-885.011 |
| 402-890.150 | E7118 | IC condensing vessel multi N/C 2100 S 402-890.150 |
| 402-950.017 | E7119 | Connector TC Vessel, 3 pcs 402-950.017 |
| 402-888.007 | E7120 | Seal ring lock 30 x 5 mm 402-888.007 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-815.035 | E7127 | Polycarbonate membrane filter, set of 100 pieces 402-815.035 |
| 402-810.507 | E7128 | Tygon tube 18 cm, connection sulfuric acid cell 402-810.507 |
| 402-815.030 | E7129 | O-ring 3.0 mm x 1.5 mm set of 10 pieces 402-815.030 |
| 402-886.172 | E7130 | O-ring for adaptor for drying tube (32 mm x 3 mm) , 1 pc 402-886.172 |
| 402-886.010 | E7132 | Gasket for oxygen lock CS (34 mm x 3 mm) 402-886.010 |
| 402-823.048 | E7134 | Membrane dryer 48" multi EA 3100 402-823.048 |
| 402-823.048 | E7135 | Fork-type clamp KS 13/2 with clamping screw 402-825.041 |
| 402-889.314 | E7138 | Septa for titration cell for Sulfur coulometer, set a 50 pieces 402-889.314 |
| 402-881.244 | E7139 | Particles filter, set of 5 pieces 402-881.244 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.306 | E7143 | Screw cap with hole GL18 402-889.306 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-885.019 | X4020 | Halogen absorber, complete with U-tube, 11mm 402-885.019 |
| 402-886.313 | X4021 | Halogen absorber, complete with U-tube, 21mm 402-886.313 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.050 | B1720 | Halogen absorber filling for GL14 tube (copper- and brass wool) 402-810.050 |
| 402-886.312 | B1721 | Halogen absorber filling for GL18 U-tube, o.d. = 21 mm (conditioned) 402-886.312 |
| 402-886.322 | B1722 | Halogen absorber filling (conditioned) for GL18 U-tube, o.d. = 21 mm, set of 5 pieces 402-886.322 |
| 402-825.150 | C3204 | U-tube, o.d. = 11 mm, without filling for halogenabsorber 402-825.150 |
| 402-881.013 | C3205 | U-tube, o.d. = 21 mm for halogen absorber (without connections) 402-881.013 |
| 402-886.129 | C3211 | Drying tube with GL45 (without connectors) 402-886.129 |
| 402-886-014 | C8130 | Ceramic Tube 402-886.014 |
| 402-815.830 | E7110 | Sealing ring dust trap for HT-oven, piece (34mm x 4 mm) 402-815.830 |
| 402-881.213 | E7111 | Headline-Disposable-In-Line-Filter, box of 10 pieces 402-881.213 |
| 402-888.007 | E7120 | Seal ring lock 30 x 5 mm 402-888.007 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-886.172 | E7130 | O-ring for adaptor for drying tube (32 mm x 3 mm) , 1 pc 402-886.172 |
| 402-886.010 | E7132 | Gasket for oxygen lock CS (34 mm x 3 mm) 402-886.010 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.306 | E7143 | Screw cap with hole GL18 402-889.306 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-885.019 | X4020 | Halogen absorber, complete with U-tube, 11mm 402-885.019 |
| 402-886.313 | X4021 | Halogen absorber, complete with U-tube, 21mm 402-886.313 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-889.050 | E7109 | Septa for manual TIC port, 12.5 mm, (multiN/C2100 without APG 60), 5pcs 402-889.050 |
| 402-888.007 | E7120 | Seal ring lock 30 x 5 mm 402-888.007 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-823.048 | E7134 | Membrane dryer 48" multi EA 3100 402-823.048 |
| 402-889.314 | E7138 | Septa for titration cell for Sulfur coulometer, set a 50 pieces 402-889.314 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.306 | E7143 | Screw cap with hole GL18 402-889.306 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-886.116 | B1161 | EMADrone Magnesium Perchlorate 501-171 454gm Magnesium Perchlorate 5.1. UN1475 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.050 | B1720 | Halogen absorber filling for GL14 tube (copper- and brass wool) 402-810.050 |
| 402-886.312 | B1721 | Halogen absorber filling for GL18 U-tube, o.d. = 21 mm (conditioned) 402-886.312 |
| 402-886.322 | B1722 | Halogen absorber filling (conditioned) for GL18 U-tube, o.d. = 21 mm, set of 5 pieces 402-886.322 |
| 402-810.048 | B1724 | Special catalyst platinum, 20g 402-810.048 |
| 402-810.059 | B1726 | Special catalyst platinum, approx. 80 ml 402-810.059 |
| 402-886.131 | B1727 | Calcium carbonate standard 100g 402-886.131 |
| 402-825.150 | C3204 | U-tube, o.d. = 11 mm, without filling for halogenabsorber 402-825.150 |
| 402-881.013 | C3205 | U-tube, o.d. = 21 mm for halogen absorber (without connections) 402-881.013 |
| 402-886.129 | C3211 | Drying tube with GL45 (without connectors) 402-886.129 |
| 402-886-014 | C8130 | Ceramic Tube 402-886.014 |
| 402-825.045 | E2018 | Forceps Stainless Steel Blunt Points - overall length 130mm |
| 402-881.228 | E7100 | Disposable retention filter (water trap) 402-881.228 |
| 402-881.245 | E7102 | Set TC pre-filter and water trap 402-881.245 |
| 402-889.050 | E7109 | Septa for manual TIC port, 12.5 mm, (multiN/C2100 without APG 60), 5pcs 402-889.050 |
| 402-881.213 | E7111 | Headline-Disposable-In-Line-Filter, box of 10 pieces 402-881.213 |
| 402-884.005 | E7115 | Pump hose for peristaltic pump,waste 402-884.005 |
| 402-888.007 | E7120 | Seal ring lock 30 x 5 mm 402-888.007 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-886.172 | E7130 | O-ring for adaptor for drying tube (32 mm x 3 mm) , 1 pc 402-886.172 |
| 402-886.010 | E7132 | Gasket for oxygen lock CS (34 mm x 3 mm) 402-886.010 |
| 402-823.048 | E7135 | Fork-type clamp KS 13/2 with clamping screw 402-825.041 |
| 402-889.314 | E7138 | Septa for titration cell for Sulfur coulometer, set a 50 pieces 402-889.314 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.306 | E7143 | Screw cap with hole GL18 402-889.306 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-885.019 | X4020 | Halogen absorber, complete with U-tube, 11mm 402-885.019 |
| 402-886.313 | X4021 | Halogen absorber, complete with U-tube, 21mm 402-886.313 |
| 402-886.116 | B1161 | EMADrone Magnesium Perchlorate 501-171 454gm Magnesium Perchlorate 5.1. UN1475 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.048 | B1724 | Special catalyst platinum, 20g 402-810.048 |
| 402-810.059 | B1726 | Special catalyst platinum, approx. 80 ml 402-810.059 |
| 402-825.150 | C3204 | U-tube, o.d. = 11 mm, without filling for halogenabsorber 402-825.150 |
| 402-889.510 | C3214 | Combustion tube EA5000 402-889.510 |
| 402-889.597 | C8131 | Combustion tube for diesel exhaust particulates multi EA 5000 402-889.597 |
| 402-825.045 | E2018 | Forceps Stainless Steel Blunt Points - overall length 130mm |
| 402-881.245 | E7102 | Set TC pre-filter and water trap 402-881.245 |
| 402-823.056 | E7103 | Needle 0.63 mm x 0.35 mm for all types of syringes set of 3 pieces 402-823.056 |
| 402-889.050 | E7109 | Septa for manual TIC port, 12.5 mm, (multiN/C2100 without APG 60), 5pcs 402-889.050 |
| 402-884.005 | E7115 | Pump hose for peristaltic pump,waste 402-884.005 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-889.314 | E7138 | Septa for titration cell for Sulfur coulometer, set a 50 pieces 402-889.314 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.306 | E7143 | Screw cap with hole GL18 402-889.306 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-885.019 | X4020 | Halogen absorber, complete with U-tube, 11mm 402-885.019 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.050 | B1720 | Halogen absorber filling for GL14 tube (copper- and brass wool) 402-810.050 |
| 402-886.312 | B1721 | Halogen absorber filling for GL18 U-tube, o.d. = 21 mm (conditioned) 402-886.312 |
| 402-886.322 | B1722 | Halogen absorber filling (conditioned) for GL18 U-tube, o.d. = 21 mm, set of 5 pieces 402-886.322 |
| 402-886.114 | B1723 | Halogen absorber filling for straight tube 402-886.114 |
| 402-810.048 | B1724 | Special catalyst platinum, 20g 402-810.048 |
| 402-810.059 | B1726 | Special catalyst platinum, approx. 80 ml 402-810.059 |
| 402-886.131 | B1727 | Calcium carbonate standard 100g 402-886.131 |
| 402-885.010 | C3201 | Combustion tube 402-885.010 |
| 402-890.134 | C3202 | Combustion tube outer diameter 16 mm 402-890.134 |
| 402-890.136 | C3203 | Combustion tube, outer diameter 16 mm, with holder 402-890.136 |
| 402-825.150 | C3204 | U-tube, o.d. = 11 mm, without filling for halogenabsorber 402-825.150 |
| 402-881.013 | C3205 | U-tube, o.d. = 21 mm for halogen absorber (without connections) 402-881.013 |
| 402-886.129 | C3211 | Drying tube with GL45 (without connectors) 402-886.129 |
| 402-886-014 | C8130 | Ceramic Tube 402-886.014 |
| 402-881.228 | E7100 | Disposable retention filter (water trap) 402-881.228 |
| 402-881.245 | E7102 | Set TC pre-filter and water trap 402-881.245 |
| 402-823.056 | E7103 | Needle 0.63 mm x 0.35 mm for all types of syringes set of 3 pieces 402-823.056 |
| 402-886.304 | E7105 | Syringe 250 ul with vent and removable needle 1x0,7,53, (for APG 60 only) 402-886.304 |
| 402-886.305 | E7106 | Syringe 500 ul with vent and removable, needle 1x0,7, 53 (for APG 60 only) 402-886.305 |
| 402-886.310 | E7107 | Septum for syringe (autosampler), 9,5 mm OD, 1 pc 402-886.310 |
| 402-886.326 | E7108 | Septa Uncut for septum-head, 17 mm, 3 PCS 402-886.326 |
| 402-889.050 | E7109 | Septa for manual TIC port, 12.5 mm, (multiN/C2100 without APG 60), 5pcs 402-889.050 |
| 402-815.830 | E7110 | Sealing ring dust trap for HT-oven, piece (34mm x 4 mm) 402-815.830 |
| 402-881.213 | E7111 | Headline-Disposable-In-Line-Filter, box of 10 pieces 402-881.213 |
| 402-884.005 | E7115 | Pump hose for peristaltic pump,waste 402-884.005 |
| 402-885.011 | E7116 | Pump hose for peristaltic pump (acid) 402-885.011 |
| 402-823.110 | E7117 | Syringe for CAVRO Syringe pump 5 ml 402-823.110 |
| 402-890.150 | E7118 | IC condensing vessel multi N/C 2100 S 402-890.150 |
| 402-950.017 | E7119 | Connector TC Vessel, 3 pcs 402-950.017 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-823.048 | E7135 | Fork-type clamp KS 13/2 with clamping screw 402-825.041 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.306 | E7143 | Screw cap with hole GL18 402-889.306 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-885.019 | X4020 | Halogen absorber, complete with U-tube, 11mm 402-885.019 |
| 402-886.313 | X4021 | Halogen absorber, complete with U-tube, 21mm 402-886.313 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.004 | B1725 | Activated carbon for AOX analysis,10g 402-810.004 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-815.035 | E7127 | Polycarbonate membrane filter, set of 100 pieces 402-815.035 |
| 402-810.507 | E7128 | Tygon tube 18 cm, connection sulfuric acid cell 402-810.507 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.050 | B1720 | Halogen absorber filling for GL14 tube (copper- and brass wool) 402-810.050 |
| 402-810.048 | B1724 | Special catalyst platinum, 20g 402-810.048 |
| 402-810.004 | B1725 | Activated carbon for AOX analysis,10g 402-810.004 |
| 402-810.059 | B1726 | Special catalyst platinum, approx. 80 ml 402-810.059 |
| 402-825.150 | C3204 | U-tube, o.d. = 11 mm, without filling for halogenabsorber 402-825.150 |
| 402-889.606 | C3212 | Combustion tube, vertical (AOX and POX) 402-889.606 |
| 402-881.228 | E7100 | Disposable retention filter (water trap) 402-881.228 |
| 402-881.245 | E7102 | Set TC pre-filter and water trap 402-881.245 |
| 402-889.050 | E7109 | Septa for manual TIC port, 12.5 mm, (multiN/C2100 without APG 60), 5pcs 402-889.050 |
| 402-884.005 | E7115 | Pump hose for peristaltic pump,waste 402-884.005 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-815.035 | E7127 | Polycarbonate membrane filter, set of 100 pieces 402-815.035 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-885.019 | X4020 | Halogen absorber, complete with U-tube, 11mm 402-885.019 |
| 402-881.228 | E7100 | Disposable retention filter (water trap) 402-881.228 |
| 402-881.245 | E7102 | Set TC pre-filter and water trap 402-881.245 |
| 402-884.005 | E7115 | Pump hose for peristaltic pump,waste 402-884.005 |
| 402-885.011 | E7116 | Pump hose for peristaltic pump (acid) 402-885.011 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
Multi X2000 - X5000
| OEM Part | Part Number | Part Description |
|---|---|---|
| 402-886.116 | B1161 | EMADrone Magnesium Perchlorate 501-171 454gm Magnesium Perchlorate 5.1. UN1475 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.050 | B1720 | Halogen absorber filling for GL14 tube (copper- and brass wool) 402-810.050 |
| 402-886.312 | B1721 | Halogen absorber filling for GL18 U-tube, o.d. = 21 mm (conditioned) 402-886.312 |
| 402-886.322 | B1722 | Halogen absorber filling (conditioned) for GL18 U-tube, o.d. = 21 mm, set of 5 pieces 402-886.322 |
| 402-886.114 | B1723 | Halogen absorber filling for straight tube 402-886.114 |
| 402-810.048 | B1724 | Special catalyst platinum, 20g 402-810.048 |
| 402-810.004 | B1725 | Activated carbon for AOX analysis,10g 402-810.004 |
| 402-810.059 | B1726 | Special catalyst platinum, approx. 80 ml 402-810.059 |
| 402-886.131 | B1727 | Calcium carbonate standard 100g 402-886.131 |
| 402-885.010 | C3201 | Combustion tube 402-885.010 |
| 402-890.134 | C3202 | Combustion tube outer diameter 16 mm 402-890.134 |
| 402-825.150 | C3204 | U-tube, o.d. = 11 mm, without filling for halogenabsorber 402-825.150 |
| 402-881.013 | C3205 | U-tube, o.d. = 21 mm for halogen absorber (without connections) 402-881.013 |
| 402-889.606 | C3212 | Combustion tube, vertical (AOX and POX) 402-889.606 |
| 402-950-019 | C5200 | Quartz combustion tube CIC Metrohm 6.7301.000 |
| 402-889.066 | C5201 | Quartz hook for ABD CIC Metrohm 6.7301.110 |
| 402-886-014 | C8130 | Ceramic Tube 402-886.014 |
| 402-889.597 | C8131 | Combustion tube for diesel exhaust particulates multi EA 5000 402-889.597 |
| 402-880.009 | C8132 | Quartz container 18 x 6 pack of 20 402-880.009 |
| 402-889.674 | C8133 | Quartz Boat 40 x 9mm 402-889.674 pack of 10 |
| C8134 | Ceramic boat for sample injection in combustion module pack of 10 | |
| 402-881.228 | E7100 | Disposable retention filter (water trap) 402-881.228 |
| 402-881.245 | E7102 | Set TC pre-filter and water trap 402-881.245 |
| 402-823.056 | E7103 | Needle 0.63 mm x 0.35 mm for all types of syringes set of 3 pieces 402-823.056 |
| 402-886.304 | E7105 | Syringe 250 ul with vent and removable needle 1x0,7,53, (for APG 60 only) 402-886.304 |
| 402-886.305 | E7106 | Syringe 500 ul with vent and removable, needle 1x0,7, 53 (for APG 60 only) 402-886.305 |
| 402-886.310 | E7107 | Septum for syringe (autosampler), 9,5 mm OD, 1 pc 402-886.310 |
| 402-886.326 | E7108 | Septa Uncut for septum-head, 17 mm, 3 PCS 402-886.326 |
| 402-889.050 | E7109 | Septa for manual TIC port, 12.5 mm, (multiN/C2100 without APG 60), 5pcs 402-889.050 |
| 402-815.830 | E7110 | Sealing ring dust trap for HT-oven, piece (34mm x 4 mm) 402-815.830 |
| 402-881.108 | E7113 | O-ring, i.d. = 4.5 mm x 1.5 mm (oxygen supply/output V1) 402-881.108 |
| 402-884.005 | E7115 | Pump hose for peristaltic pump,waste 402-884.005 |
| 402-885.011 | E7116 | Pump hose for peristaltic pump (acid) 402-885.011 |
| 402-890.150 | E7118 | IC condensing vessel multi N/C 2100 S 402-890.150 |
| 402-950.017 | E7119 | Connector TC Vessel, 3 pcs 402-950.017 |
| 402-888.007 | E7120 | Seal ring lock 30 x 5 mm 402-888.007 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-815.035 | E7127 | Polycarbonate membrane filter, set of 100 pieces 402-815.035 |
| 402-810.507 | E7128 | Tygon tube 18 cm, connection sulfuric acid cell 402-810.507 |
| 402-815.030 | E7129 | O-ring 3.0 mm x 1.5 mm set of 10 pieces 402-815.030 |
| 402-886.172 | E7130 | O-ring for adaptor for drying tube (32 mm x 3 mm) , 1 pc 402-886.172 |
| 402-886.010 | E7132 | Gasket for oxygen lock CS (34 mm x 3 mm) 402-886.010 |
| 402-823.048 | E7134 | Membrane dryer 48" multi EA 3100 402-823.048 |
| 402-823.048 | E7135 | Fork-type clamp KS 13/2 with clamping screw 402-825.041 |
| 402-889.314 | E7138 | Septa for titration cell for Sulfur coulometer, set a 50 pieces 402-889.314 |
| 402-881.244 | E7139 | Particles filter, set of 5 pieces 402-881.244 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.306 | E7143 | Screw cap with hole GL18 402-889.306 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-885.019 | X4020 | Halogen absorber, complete with U-tube, 11mm 402-885.019 |
| 402-886.313 | X4021 | Halogen absorber, complete with U-tube, 21mm 402-886.313 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.050 | B1720 | Halogen absorber filling for GL14 tube (copper- and brass wool) 402-810.050 |
| 402-886.312 | B1721 | Halogen absorber filling for GL18 U-tube, o.d. = 21 mm (conditioned) 402-886.312 |
| 402-886.322 | B1722 | Halogen absorber filling (conditioned) for GL18 U-tube, o.d. = 21 mm, set of 5 pieces 402-886.322 |
| 402-825.150 | C3204 | U-tube, o.d. = 11 mm, without filling for halogenabsorber 402-825.150 |
| 402-881.013 | C3205 | U-tube, o.d. = 21 mm for halogen absorber (without connections) 402-881.013 |
| 402-886.129 | C3211 | Drying tube with GL45 (without connectors) 402-886.129 |
| 402-886-014 | C8130 | Ceramic Tube 402-886.014 |
| 402-815.830 | E7110 | Sealing ring dust trap for HT-oven, piece (34mm x 4 mm) 402-815.830 |
| 402-881.213 | E7111 | Headline-Disposable-In-Line-Filter, box of 10 pieces 402-881.213 |
| 402-888.007 | E7120 | Seal ring lock 30 x 5 mm 402-888.007 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-886.172 | E7130 | O-ring for adaptor for drying tube (32 mm x 3 mm) , 1 pc 402-886.172 |
| 402-886.010 | E7132 | Gasket for oxygen lock CS (34 mm x 3 mm) 402-886.010 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.306 | E7143 | Screw cap with hole GL18 402-889.306 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-885.019 | X4020 | Halogen absorber, complete with U-tube, 11mm 402-885.019 |
| 402-886.313 | X4021 | Halogen absorber, complete with U-tube, 21mm 402-886.313 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-889.050 | E7109 | Septa for manual TIC port, 12.5 mm, (multiN/C2100 without APG 60), 5pcs 402-889.050 |
| 402-888.007 | E7120 | Seal ring lock 30 x 5 mm 402-888.007 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-823.048 | E7134 | Membrane dryer 48" multi EA 3100 402-823.048 |
| 402-889.314 | E7138 | Septa for titration cell for Sulfur coulometer, set a 50 pieces 402-889.314 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.306 | E7143 | Screw cap with hole GL18 402-889.306 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-886.116 | B1161 | EMADrone Magnesium Perchlorate 501-171 454gm Magnesium Perchlorate 5.1. UN1475 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.050 | B1720 | Halogen absorber filling for GL14 tube (copper- and brass wool) 402-810.050 |
| 402-886.312 | B1721 | Halogen absorber filling for GL18 U-tube, o.d. = 21 mm (conditioned) 402-886.312 |
| 402-886.322 | B1722 | Halogen absorber filling (conditioned) for GL18 U-tube, o.d. = 21 mm, set of 5 pieces 402-886.322 |
| 402-810.048 | B1724 | Special catalyst platinum, 20g 402-810.048 |
| 402-810.059 | B1726 | Special catalyst platinum, approx. 80 ml 402-810.059 |
| 402-886.131 | B1727 | Calcium carbonate standard 100g 402-886.131 |
| 402-825.150 | C3204 | U-tube, o.d. = 11 mm, without filling for halogenabsorber 402-825.150 |
| 402-881.013 | C3205 | U-tube, o.d. = 21 mm for halogen absorber (without connections) 402-881.013 |
| 402-886.129 | C3211 | Drying tube with GL45 (without connectors) 402-886.129 |
| 402-886-014 | C8130 | Ceramic Tube 402-886.014 |
| 402-825.045 | E2018 | Forceps Stainless Steel Blunt Points - overall length 130mm |
| 402-881.228 | E7100 | Disposable retention filter (water trap) 402-881.228 |
| 402-881.245 | E7102 | Set TC pre-filter and water trap 402-881.245 |
| 402-889.050 | E7109 | Septa for manual TIC port, 12.5 mm, (multiN/C2100 without APG 60), 5pcs 402-889.050 |
| 402-881.213 | E7111 | Headline-Disposable-In-Line-Filter, box of 10 pieces 402-881.213 |
| 402-884.005 | E7115 | Pump hose for peristaltic pump,waste 402-884.005 |
| 402-888.007 | E7120 | Seal ring lock 30 x 5 mm 402-888.007 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-886.172 | E7130 | O-ring for adaptor for drying tube (32 mm x 3 mm) , 1 pc 402-886.172 |
| 402-886.010 | E7132 | Gasket for oxygen lock CS (34 mm x 3 mm) 402-886.010 |
| 402-823.048 | E7135 | Fork-type clamp KS 13/2 with clamping screw 402-825.041 |
| 402-889.314 | E7138 | Septa for titration cell for Sulfur coulometer, set a 50 pieces 402-889.314 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.306 | E7143 | Screw cap with hole GL18 402-889.306 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-885.019 | X4020 | Halogen absorber, complete with U-tube, 11mm 402-885.019 |
| 402-886.313 | X4021 | Halogen absorber, complete with U-tube, 21mm 402-886.313 |
| 402-886.116 | B1161 | EMADrone Magnesium Perchlorate 501-171 454gm Magnesium Perchlorate 5.1. UN1475 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.048 | B1724 | Special catalyst platinum, 20g 402-810.048 |
| 402-810.059 | B1726 | Special catalyst platinum, approx. 80 ml 402-810.059 |
| 402-825.150 | C3204 | U-tube, o.d. = 11 mm, without filling for halogenabsorber 402-825.150 |
| 402-889.510 | C3214 | Combustion tube EA5000 402-889.510 |
| 402-889.597 | C8131 | Combustion tube for diesel exhaust particulates multi EA 5000 402-889.597 |
| 402-825.045 | E2018 | Forceps Stainless Steel Blunt Points - overall length 130mm |
| 402-881.245 | E7102 | Set TC pre-filter and water trap 402-881.245 |
| 402-823.056 | E7103 | Needle 0.63 mm x 0.35 mm for all types of syringes set of 3 pieces 402-823.056 |
| 402-889.050 | E7109 | Septa for manual TIC port, 12.5 mm, (multiN/C2100 without APG 60), 5pcs 402-889.050 |
| 402-884.005 | E7115 | Pump hose for peristaltic pump,waste 402-884.005 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-889.314 | E7138 | Septa for titration cell for Sulfur coulometer, set a 50 pieces 402-889.314 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.306 | E7143 | Screw cap with hole GL18 402-889.306 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-885.019 | X4020 | Halogen absorber, complete with U-tube, 11mm 402-885.019 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.050 | B1720 | Halogen absorber filling for GL14 tube (copper- and brass wool) 402-810.050 |
| 402-886.312 | B1721 | Halogen absorber filling for GL18 U-tube, o.d. = 21 mm (conditioned) 402-886.312 |
| 402-886.322 | B1722 | Halogen absorber filling (conditioned) for GL18 U-tube, o.d. = 21 mm, set of 5 pieces 402-886.322 |
| 402-886.114 | B1723 | Halogen absorber filling for straight tube 402-886.114 |
| 402-810.048 | B1724 | Special catalyst platinum, 20g 402-810.048 |
| 402-810.059 | B1726 | Special catalyst platinum, approx. 80 ml 402-810.059 |
| 402-886.131 | B1727 | Calcium carbonate standard 100g 402-886.131 |
| 402-885.010 | C3201 | Combustion tube 402-885.010 |
| 402-890.134 | C3202 | Combustion tube outer diameter 16 mm 402-890.134 |
| 402-890.136 | C3203 | Combustion tube, outer diameter 16 mm, with holder 402-890.136 |
| 402-825.150 | C3204 | U-tube, o.d. = 11 mm, without filling for halogenabsorber 402-825.150 |
| 402-881.013 | C3205 | U-tube, o.d. = 21 mm for halogen absorber (without connections) 402-881.013 |
| 402-886.129 | C3211 | Drying tube with GL45 (without connectors) 402-886.129 |
| 402-886-014 | C8130 | Ceramic Tube 402-886.014 |
| 402-881.228 | E7100 | Disposable retention filter (water trap) 402-881.228 |
| 402-881.245 | E7102 | Set TC pre-filter and water trap 402-881.245 |
| 402-823.056 | E7103 | Needle 0.63 mm x 0.35 mm for all types of syringes set of 3 pieces 402-823.056 |
| 402-886.304 | E7105 | Syringe 250 ul with vent and removable needle 1x0,7,53, (for APG 60 only) 402-886.304 |
| 402-886.305 | E7106 | Syringe 500 ul with vent and removable, needle 1x0,7, 53 (for APG 60 only) 402-886.305 |
| 402-886.310 | E7107 | Septum for syringe (autosampler), 9,5 mm OD, 1 pc 402-886.310 |
| 402-886.326 | E7108 | Septa Uncut for septum-head, 17 mm, 3 PCS 402-886.326 |
| 402-889.050 | E7109 | Septa for manual TIC port, 12.5 mm, (multiN/C2100 without APG 60), 5pcs 402-889.050 |
| 402-815.830 | E7110 | Sealing ring dust trap for HT-oven, piece (34mm x 4 mm) 402-815.830 |
| 402-881.213 | E7111 | Headline-Disposable-In-Line-Filter, box of 10 pieces 402-881.213 |
| 402-884.005 | E7115 | Pump hose for peristaltic pump,waste 402-884.005 |
| 402-885.011 | E7116 | Pump hose for peristaltic pump (acid) 402-885.011 |
| 402-823.110 | E7117 | Syringe for CAVRO Syringe pump 5 ml 402-823.110 |
| 402-890.150 | E7118 | IC condensing vessel multi N/C 2100 S 402-890.150 |
| 402-950.017 | E7119 | Connector TC Vessel, 3 pcs 402-950.017 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-823.048 | E7135 | Fork-type clamp KS 13/2 with clamping screw 402-825.041 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.306 | E7143 | Screw cap with hole GL18 402-889.306 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-885.019 | X4020 | Halogen absorber, complete with U-tube, 11mm 402-885.019 |
| 402-886.313 | X4021 | Halogen absorber, complete with U-tube, 21mm 402-886.313 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.004 | B1725 | Activated carbon for AOX analysis,10g 402-810.004 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-815.035 | E7127 | Polycarbonate membrane filter, set of 100 pieces 402-815.035 |
| 402-810.507 | E7128 | Tygon tube 18 cm, connection sulfuric acid cell 402-810.507 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.050 | B1720 | Halogen absorber filling for GL14 tube (copper- and brass wool) 402-810.050 |
| 402-810.048 | B1724 | Special catalyst platinum, 20g 402-810.048 |
| 402-810.004 | B1725 | Activated carbon for AOX analysis,10g 402-810.004 |
| 402-810.059 | B1726 | Special catalyst platinum, approx. 80 ml 402-810.059 |
| 402-825.150 | C3204 | U-tube, o.d. = 11 mm, without filling for halogenabsorber 402-825.150 |
| 402-889.606 | C3212 | Combustion tube, vertical (AOX and POX) 402-889.606 |
| 402-881.228 | E7100 | Disposable retention filter (water trap) 402-881.228 |
| 402-881.245 | E7102 | Set TC pre-filter and water trap 402-881.245 |
| 402-889.050 | E7109 | Septa for manual TIC port, 12.5 mm, (multiN/C2100 without APG 60), 5pcs 402-889.050 |
| 402-884.005 | E7115 | Pump hose for peristaltic pump,waste 402-884.005 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-815.035 | E7127 | Polycarbonate membrane filter, set of 100 pieces 402-815.035 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-885.019 | X4020 | Halogen absorber, complete with U-tube, 11mm 402-885.019 |
| 402-881.228 | E7100 | Disposable retention filter (water trap) 402-881.228 |
| 402-881.245 | E7102 | Set TC pre-filter and water trap 402-881.245 |
| 402-884.005 | E7115 | Pump hose for peristaltic pump,waste 402-884.005 |
| 402-885.011 | E7116 | Pump hose for peristaltic pump (acid) 402-885.011 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
Pharma TOC
| OEM Part | Part Number | Part Description |
|---|---|---|
| 402-886.116 | B1161 | EMADrone Magnesium Perchlorate 501-171 454gm Magnesium Perchlorate 5.1. UN1475 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.050 | B1720 | Halogen absorber filling for GL14 tube (copper- and brass wool) 402-810.050 |
| 402-886.312 | B1721 | Halogen absorber filling for GL18 U-tube, o.d. = 21 mm (conditioned) 402-886.312 |
| 402-886.322 | B1722 | Halogen absorber filling (conditioned) for GL18 U-tube, o.d. = 21 mm, set of 5 pieces 402-886.322 |
| 402-886.114 | B1723 | Halogen absorber filling for straight tube 402-886.114 |
| 402-810.048 | B1724 | Special catalyst platinum, 20g 402-810.048 |
| 402-810.004 | B1725 | Activated carbon for AOX analysis,10g 402-810.004 |
| 402-810.059 | B1726 | Special catalyst platinum, approx. 80 ml 402-810.059 |
| 402-886.131 | B1727 | Calcium carbonate standard 100g 402-886.131 |
| 402-885.010 | C3201 | Combustion tube 402-885.010 |
| 402-890.134 | C3202 | Combustion tube outer diameter 16 mm 402-890.134 |
| 402-825.150 | C3204 | U-tube, o.d. = 11 mm, without filling for halogenabsorber 402-825.150 |
| 402-881.013 | C3205 | U-tube, o.d. = 21 mm for halogen absorber (without connections) 402-881.013 |
| 402-889.606 | C3212 | Combustion tube, vertical (AOX and POX) 402-889.606 |
| 402-950-019 | C5200 | Quartz combustion tube CIC Metrohm 6.7301.000 |
| 402-889.066 | C5201 | Quartz hook for ABD CIC Metrohm 6.7301.110 |
| 402-886-014 | C8130 | Ceramic Tube 402-886.014 |
| 402-889.597 | C8131 | Combustion tube for diesel exhaust particulates multi EA 5000 402-889.597 |
| 402-880.009 | C8132 | Quartz container 18 x 6 pack of 20 402-880.009 |
| 402-889.674 | C8133 | Quartz Boat 40 x 9mm 402-889.674 pack of 10 |
| C8134 | Ceramic boat for sample injection in combustion module pack of 10 | |
| 402-881.228 | E7100 | Disposable retention filter (water trap) 402-881.228 |
| 402-881.245 | E7102 | Set TC pre-filter and water trap 402-881.245 |
| 402-823.056 | E7103 | Needle 0.63 mm x 0.35 mm for all types of syringes set of 3 pieces 402-823.056 |
| 402-886.304 | E7105 | Syringe 250 ul with vent and removable needle 1x0,7,53, (for APG 60 only) 402-886.304 |
| 402-886.305 | E7106 | Syringe 500 ul with vent and removable, needle 1x0,7, 53 (for APG 60 only) 402-886.305 |
| 402-886.310 | E7107 | Septum for syringe (autosampler), 9,5 mm OD, 1 pc 402-886.310 |
| 402-886.326 | E7108 | Septa Uncut for septum-head, 17 mm, 3 PCS 402-886.326 |
| 402-889.050 | E7109 | Septa for manual TIC port, 12.5 mm, (multiN/C2100 without APG 60), 5pcs 402-889.050 |
| 402-815.830 | E7110 | Sealing ring dust trap for HT-oven, piece (34mm x 4 mm) 402-815.830 |
| 402-881.108 | E7113 | O-ring, i.d. = 4.5 mm x 1.5 mm (oxygen supply/output V1) 402-881.108 |
| 402-884.005 | E7115 | Pump hose for peristaltic pump,waste 402-884.005 |
| 402-885.011 | E7116 | Pump hose for peristaltic pump (acid) 402-885.011 |
| 402-890.150 | E7118 | IC condensing vessel multi N/C 2100 S 402-890.150 |
| 402-950.017 | E7119 | Connector TC Vessel, 3 pcs 402-950.017 |
| 402-888.007 | E7120 | Seal ring lock 30 x 5 mm 402-888.007 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-815.035 | E7127 | Polycarbonate membrane filter, set of 100 pieces 402-815.035 |
| 402-810.507 | E7128 | Tygon tube 18 cm, connection sulfuric acid cell 402-810.507 |
| 402-815.030 | E7129 | O-ring 3.0 mm x 1.5 mm set of 10 pieces 402-815.030 |
| 402-886.172 | E7130 | O-ring for adaptor for drying tube (32 mm x 3 mm) , 1 pc 402-886.172 |
| 402-886.010 | E7132 | Gasket for oxygen lock CS (34 mm x 3 mm) 402-886.010 |
| 402-823.048 | E7134 | Membrane dryer 48" multi EA 3100 402-823.048 |
| 402-823.048 | E7135 | Fork-type clamp KS 13/2 with clamping screw 402-825.041 |
| 402-889.314 | E7138 | Septa for titration cell for Sulfur coulometer, set a 50 pieces 402-889.314 |
| 402-881.244 | E7139 | Particles filter, set of 5 pieces 402-881.244 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.306 | E7143 | Screw cap with hole GL18 402-889.306 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-885.019 | X4020 | Halogen absorber, complete with U-tube, 11mm 402-885.019 |
| 402-886.313 | X4021 | Halogen absorber, complete with U-tube, 21mm 402-886.313 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.050 | B1720 | Halogen absorber filling for GL14 tube (copper- and brass wool) 402-810.050 |
| 402-886.312 | B1721 | Halogen absorber filling for GL18 U-tube, o.d. = 21 mm (conditioned) 402-886.312 |
| 402-886.322 | B1722 | Halogen absorber filling (conditioned) for GL18 U-tube, o.d. = 21 mm, set of 5 pieces 402-886.322 |
| 402-825.150 | C3204 | U-tube, o.d. = 11 mm, without filling for halogenabsorber 402-825.150 |
| 402-881.013 | C3205 | U-tube, o.d. = 21 mm for halogen absorber (without connections) 402-881.013 |
| 402-886.129 | C3211 | Drying tube with GL45 (without connectors) 402-886.129 |
| 402-886-014 | C8130 | Ceramic Tube 402-886.014 |
| 402-815.830 | E7110 | Sealing ring dust trap for HT-oven, piece (34mm x 4 mm) 402-815.830 |
| 402-881.213 | E7111 | Headline-Disposable-In-Line-Filter, box of 10 pieces 402-881.213 |
| 402-888.007 | E7120 | Seal ring lock 30 x 5 mm 402-888.007 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-886.172 | E7130 | O-ring for adaptor for drying tube (32 mm x 3 mm) , 1 pc 402-886.172 |
| 402-886.010 | E7132 | Gasket for oxygen lock CS (34 mm x 3 mm) 402-886.010 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.306 | E7143 | Screw cap with hole GL18 402-889.306 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-885.019 | X4020 | Halogen absorber, complete with U-tube, 11mm 402-885.019 |
| 402-886.313 | X4021 | Halogen absorber, complete with U-tube, 21mm 402-886.313 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-889.050 | E7109 | Septa for manual TIC port, 12.5 mm, (multiN/C2100 without APG 60), 5pcs 402-889.050 |
| 402-888.007 | E7120 | Seal ring lock 30 x 5 mm 402-888.007 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-823.048 | E7134 | Membrane dryer 48" multi EA 3100 402-823.048 |
| 402-889.314 | E7138 | Septa for titration cell for Sulfur coulometer, set a 50 pieces 402-889.314 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.306 | E7143 | Screw cap with hole GL18 402-889.306 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-886.116 | B1161 | EMADrone Magnesium Perchlorate 501-171 454gm Magnesium Perchlorate 5.1. UN1475 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.050 | B1720 | Halogen absorber filling for GL14 tube (copper- and brass wool) 402-810.050 |
| 402-886.312 | B1721 | Halogen absorber filling for GL18 U-tube, o.d. = 21 mm (conditioned) 402-886.312 |
| 402-886.322 | B1722 | Halogen absorber filling (conditioned) for GL18 U-tube, o.d. = 21 mm, set of 5 pieces 402-886.322 |
| 402-810.048 | B1724 | Special catalyst platinum, 20g 402-810.048 |
| 402-810.059 | B1726 | Special catalyst platinum, approx. 80 ml 402-810.059 |
| 402-886.131 | B1727 | Calcium carbonate standard 100g 402-886.131 |
| 402-825.150 | C3204 | U-tube, o.d. = 11 mm, without filling for halogenabsorber 402-825.150 |
| 402-881.013 | C3205 | U-tube, o.d. = 21 mm for halogen absorber (without connections) 402-881.013 |
| 402-886.129 | C3211 | Drying tube with GL45 (without connectors) 402-886.129 |
| 402-886-014 | C8130 | Ceramic Tube 402-886.014 |
| 402-825.045 | E2018 | Forceps Stainless Steel Blunt Points - overall length 130mm |
| 402-881.228 | E7100 | Disposable retention filter (water trap) 402-881.228 |
| 402-881.245 | E7102 | Set TC pre-filter and water trap 402-881.245 |
| 402-889.050 | E7109 | Septa for manual TIC port, 12.5 mm, (multiN/C2100 without APG 60), 5pcs 402-889.050 |
| 402-881.213 | E7111 | Headline-Disposable-In-Line-Filter, box of 10 pieces 402-881.213 |
| 402-884.005 | E7115 | Pump hose for peristaltic pump,waste 402-884.005 |
| 402-888.007 | E7120 | Seal ring lock 30 x 5 mm 402-888.007 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-886.172 | E7130 | O-ring for adaptor for drying tube (32 mm x 3 mm) , 1 pc 402-886.172 |
| 402-886.010 | E7132 | Gasket for oxygen lock CS (34 mm x 3 mm) 402-886.010 |
| 402-823.048 | E7135 | Fork-type clamp KS 13/2 with clamping screw 402-825.041 |
| 402-889.314 | E7138 | Septa for titration cell for Sulfur coulometer, set a 50 pieces 402-889.314 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.306 | E7143 | Screw cap with hole GL18 402-889.306 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-885.019 | X4020 | Halogen absorber, complete with U-tube, 11mm 402-885.019 |
| 402-886.313 | X4021 | Halogen absorber, complete with U-tube, 21mm 402-886.313 |
| 402-886.116 | B1161 | EMADrone Magnesium Perchlorate 501-171 454gm Magnesium Perchlorate 5.1. UN1475 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.048 | B1724 | Special catalyst platinum, 20g 402-810.048 |
| 402-810.059 | B1726 | Special catalyst platinum, approx. 80 ml 402-810.059 |
| 402-825.150 | C3204 | U-tube, o.d. = 11 mm, without filling for halogenabsorber 402-825.150 |
| 402-889.510 | C3214 | Combustion tube EA5000 402-889.510 |
| 402-889.597 | C8131 | Combustion tube for diesel exhaust particulates multi EA 5000 402-889.597 |
| 402-825.045 | E2018 | Forceps Stainless Steel Blunt Points - overall length 130mm |
| 402-881.245 | E7102 | Set TC pre-filter and water trap 402-881.245 |
| 402-823.056 | E7103 | Needle 0.63 mm x 0.35 mm for all types of syringes set of 3 pieces 402-823.056 |
| 402-889.050 | E7109 | Septa for manual TIC port, 12.5 mm, (multiN/C2100 without APG 60), 5pcs 402-889.050 |
| 402-884.005 | E7115 | Pump hose for peristaltic pump,waste 402-884.005 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-889.314 | E7138 | Septa for titration cell for Sulfur coulometer, set a 50 pieces 402-889.314 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.306 | E7143 | Screw cap with hole GL18 402-889.306 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-885.019 | X4020 | Halogen absorber, complete with U-tube, 11mm 402-885.019 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.050 | B1720 | Halogen absorber filling for GL14 tube (copper- and brass wool) 402-810.050 |
| 402-886.312 | B1721 | Halogen absorber filling for GL18 U-tube, o.d. = 21 mm (conditioned) 402-886.312 |
| 402-886.322 | B1722 | Halogen absorber filling (conditioned) for GL18 U-tube, o.d. = 21 mm, set of 5 pieces 402-886.322 |
| 402-886.114 | B1723 | Halogen absorber filling for straight tube 402-886.114 |
| 402-810.048 | B1724 | Special catalyst platinum, 20g 402-810.048 |
| 402-810.059 | B1726 | Special catalyst platinum, approx. 80 ml 402-810.059 |
| 402-886.131 | B1727 | Calcium carbonate standard 100g 402-886.131 |
| 402-885.010 | C3201 | Combustion tube 402-885.010 |
| 402-890.134 | C3202 | Combustion tube outer diameter 16 mm 402-890.134 |
| 402-890.136 | C3203 | Combustion tube, outer diameter 16 mm, with holder 402-890.136 |
| 402-825.150 | C3204 | U-tube, o.d. = 11 mm, without filling for halogenabsorber 402-825.150 |
| 402-881.013 | C3205 | U-tube, o.d. = 21 mm for halogen absorber (without connections) 402-881.013 |
| 402-886.129 | C3211 | Drying tube with GL45 (without connectors) 402-886.129 |
| 402-886-014 | C8130 | Ceramic Tube 402-886.014 |
| 402-881.228 | E7100 | Disposable retention filter (water trap) 402-881.228 |
| 402-881.245 | E7102 | Set TC pre-filter and water trap 402-881.245 |
| 402-823.056 | E7103 | Needle 0.63 mm x 0.35 mm for all types of syringes set of 3 pieces 402-823.056 |
| 402-886.304 | E7105 | Syringe 250 ul with vent and removable needle 1x0,7,53, (for APG 60 only) 402-886.304 |
| 402-886.305 | E7106 | Syringe 500 ul with vent and removable, needle 1x0,7, 53 (for APG 60 only) 402-886.305 |
| 402-886.310 | E7107 | Septum for syringe (autosampler), 9,5 mm OD, 1 pc 402-886.310 |
| 402-886.326 | E7108 | Septa Uncut for septum-head, 17 mm, 3 PCS 402-886.326 |
| 402-889.050 | E7109 | Septa for manual TIC port, 12.5 mm, (multiN/C2100 without APG 60), 5pcs 402-889.050 |
| 402-815.830 | E7110 | Sealing ring dust trap for HT-oven, piece (34mm x 4 mm) 402-815.830 |
| 402-881.213 | E7111 | Headline-Disposable-In-Line-Filter, box of 10 pieces 402-881.213 |
| 402-884.005 | E7115 | Pump hose for peristaltic pump,waste 402-884.005 |
| 402-885.011 | E7116 | Pump hose for peristaltic pump (acid) 402-885.011 |
| 402-823.110 | E7117 | Syringe for CAVRO Syringe pump 5 ml 402-823.110 |
| 402-890.150 | E7118 | IC condensing vessel multi N/C 2100 S 402-890.150 |
| 402-950.017 | E7119 | Connector TC Vessel, 3 pcs 402-950.017 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-823.048 | E7135 | Fork-type clamp KS 13/2 with clamping screw 402-825.041 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.306 | E7143 | Screw cap with hole GL18 402-889.306 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-885.019 | X4020 | Halogen absorber, complete with U-tube, 11mm 402-885.019 |
| 402-886.313 | X4021 | Halogen absorber, complete with U-tube, 21mm 402-886.313 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.004 | B1725 | Activated carbon for AOX analysis,10g 402-810.004 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-815.035 | E7127 | Polycarbonate membrane filter, set of 100 pieces 402-815.035 |
| 402-810.507 | E7128 | Tygon tube 18 cm, connection sulfuric acid cell 402-810.507 |
| 402-881.119|402.889.305 | E7142 | Screw joint cap GL14 with hole (multi X 2000) 402-881.119 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-825.044 | B1460 | Quartz Wool 6g 402-825.044 |
| 402-810.050 | B1720 | Halogen absorber filling for GL14 tube (copper- and brass wool) 402-810.050 |
| 402-810.048 | B1724 | Special catalyst platinum, 20g 402-810.048 |
| 402-810.004 | B1725 | Activated carbon for AOX analysis,10g 402-810.004 |
| 402-810.059 | B1726 | Special catalyst platinum, approx. 80 ml 402-810.059 |
| 402-825.150 | C3204 | U-tube, o.d. = 11 mm, without filling for halogenabsorber 402-825.150 |
| 402-889.606 | C3212 | Combustion tube, vertical (AOX and POX) 402-889.606 |
| 402-881.228 | E7100 | Disposable retention filter (water trap) 402-881.228 |
| 402-881.245 | E7102 | Set TC pre-filter and water trap 402-881.245 |
| 402-889.050 | E7109 | Septa for manual TIC port, 12.5 mm, (multiN/C2100 without APG 60), 5pcs 402-889.050 |
| 402-884.005 | E7115 | Pump hose for peristaltic pump,waste 402-884.005 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-815.035 | E7127 | Polycarbonate membrane filter, set of 100 pieces 402-815.035 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
| 402-885.019 | X4020 | Halogen absorber, complete with U-tube, 11mm 402-885.019 |
| 402-881.228 | E7100 | Disposable retention filter (water trap) 402-881.228 |
| 402-881.245 | E7102 | Set TC pre-filter and water trap 402-881.245 |
| 402-884.005 | E7115 | Pump hose for peristaltic pump,waste 402-884.005 |
| 402-885.011 | E7116 | Pump hose for peristaltic pump (acid) 402-885.011 |
| 402-881.027 | E7121 | Finger-Tight-Set 1/16" for tube set, PEEK 402-881.027 |
| 402-820.057 | E7122 | Ferrule 1/16", 1 piece 402-820.057 |
| 402-880.351 | E7123 | Male nut, 1/16" 402-880.351 |
| 402-881.026 | E7124 | Finger-tight-set 1/8" for set of hoses 402-881.026 |
| 402-880.352 | E7125 | Ferrule 1/8", 1 piece 402-880.352 |
| 402-880.353 | E7126 | Male nut, 1/8" 402-880.353 |
| 402-889.307 | E7144 | Sealing for screw cap with hole GL18 Sulfur coulometer 402-889.307 |
| 402-889.309 | E7145 | Sealing for screw cap with hole GL14 Sulfur coulometer 402-889.309 |
Hãy là người đầu tiên nhận xét “Vật tư tiêu hao ANALYTIK JENA”
Sản phẩm tương tự
- Vật tư tiêu hao
- Viên chuẩn Benzoic
- chất chuẩn Coal standard
- chất trợ cháy, chất khử
- EMIA-Expert
- EMIA-320V2/920V2
- EMIA820V/320V/220V
- EMIA-V series
- CRM phân tích kim loại
- ống đốt mẫu
- chất khử CO2
- Mẫu chuẩn than, khoáng sản
Đánh giá
Chưa có đánh giá nào.