News and Events
TSHR international introduces the Total Chlorine Analyzer, model TX 6000, as a trace level analyzer that gets you the necessary data quickly, reliable and accurately. The TX 6000 is matrix independent and fully complies with international industrial and environmental standards.
The TSHR TX 6000 Total Chlorine Analyzer ensures complete combustion with minimum maintenance
The TSHR TX 6000 Total Chlorine Analyzer works around the clock, and can be equipped with a HR7000 liquid auto sampler for fully automatic liquids samples analysis
TSHR TX 6000 Total Chlorine Analyzer analyses solid samples from very low levels (100 ppb) to very high concentrations (10.000 ppm)
The TX 6000 is easily adaptable to new types of analyses (from halogens to sulfur)
The TX 6000 is superior to wet chemistry and competitive instrumental methods.
This Total Chlorine Analyzer incorporates a dedicated halogen titration cell which is ideally suited for microcoulometric detection of total chlorine. The titration method enables calibration free measurements and detection to maximize productivity.
TSHR TX Chlorine Module
This TX chlorine module can be added to TSHR TN, TS and TN/TS 6000 Series configurations to have multi-element trace level analysis.
The TX 6000 and TX module are fully compliant with the following regulatory methods: ASTM D4929, ASTM D5194, ASTM D5808, ASTM D7457, UOP 779
For analysis of heavy hydrocarbons and solid samples, the TSHR boat introduction module is the key. The automatic boat driven concept controlled by Athena software, provides the optimum solution for many applications. The high sample load capacity and integrated septum stopper minimizes weighing errors and eliminates problems caused by non-homogeneous samples. The module is supported with quick gas connectors for oxygen and carrier gas (Ar/He).
The TX 6000 can be expanded with a sulfur (UV-Fluorescence) module and with the TSHR GM 7000, Gas & LPG sample introduction module.
|Parameter||TX LIQUIDS||TX Solids|
|Working ranges||0,2 – 5.000 ppm||0,5 – 10.000 ppm|
|Detection Limit||100 ppb||200 ppb|
|Sample Matrix||Light and Heavy hydrocarbons|
|Quantity of sample||0,1 – 100 mg|
|Analysis time||4 – 10 minutes|
|Relative standard deviation||< 5%|
|Dimensions||960 (W) x 390 (H) x 590 (D) mm
37,7 (W) x 15,4 (H) x 23,2 (D) inches
|Furnace Voltage||2 x 24 V, 50/60 Hz|
|Furnace Power||2 x 300 W|
|Furnace Temperature Sensor||2 x Ni-Cr/Ni|
|Furnace configuration||Dual temperature controlled|
|Furnace Temperature||1250 °C Max|
|Type of Analyses||Total Halogens and coulometric sulfur|
|PC operating system||Windows 7 or higher|
|Computer||Intel Core i3 / AMD Phenom or better|
|Regulatory compliance||ASTM, ISO|
|Voltage||115/230 V, 50/60 Hz|
|Gas connector||1/8” swagelok|
|Gasses||O2(99,6%) medical grade 2.6
Ar or He (99,998%) technial grade 4.8
|Gas pressure||2 – 3 Bar (30-45 psi)|
|Ambient temperature||5 – 35 °C (41 – 95 °F)|