News and Events
TSHR introduces the new generation of Total Nitrogen Analyser for today’s and tomorrow
The best solution for environmental and petrochemical application challenges. Analyse the most extensive range of sample matrix (Gas, LPG and Liquid) with respect to international standards. All in combination with the new user friendly and intuitive Athena software.
The TSHR TN 7000 Total Nitrogen Analyzer is designed to measure nitrogen levels over a wide range of liquids sample types and nitrogen concentrations quickly and accurately. The TSHR TN 7000 is matrix independent and complies fully with DIN, ASTM, IP and CEN standards.
ASTM D4629, ASTM D5762, ASTM 6069, ASTM D7184 and UOP 971.
The 5 years furnace life-time (compared to the standard 2 year offered by competitors) provides continuous productivity.
Delivers low detection limits for when sensitivity matters.
Easily analyzes almost any sample type and concentration – from 20 ppb to 5000 pp.
The TSHR TN 7000 Total Nitrogen Analyser will be delivered with the HR 7000 liquids auto sampler.
Total Nitrogen analysis is essential for lean, clean and responsible industries. Nitrogen containing compounds play an important role in the manufacture of chemicals, petrochemicals, foodstuffs and beverages. Levels of nitrogen emitted into the atmosphere are stringently controlled by worldwide pollution legislation aimed at reducing global warming. The control and measurement of Nitrogen levels in industrial materials and processes is also critical for the repeatability, efficiency and quality of the finished product to be maintained.
The TSHR TN/TS 7000 Analyzer:
Combine the power of the TSHR TN 7000 and TSHR TS 7000 analyzers in one powerful instrument for a broader analytical range. Perform simultaneous Total Nitrogen and Total Sulfur analyses easily and productively whilst using less laboratory space.
|Sample matrix||Light hydrocarbons|
|Quantity of sample||1 – 100 µL|
|Analysis time||3 – 6 mins|
|Working range||30 ppb – 5000 ppm|
|Regulatory compliance||ASTM, IP, UOP|
|Furnace Voltage||2 x 24 V, 50/60 Hz|
|Furnace Power||2 x 300 W|
|Furnace Temperature Sensor||2 x Ni-Cr/Ni|
|Furnace configuration||Dual temperature controlled|
|Furnace Temperature||1250 °C Max|
|Type of Analyses||Total Nitrogen|
|PC operating system||Windows 7 or higher|
|Computer||Intel Core i3 / AMD Phenom or better|
|Optional accessories||Gas Injection Module|
|Voltage||115/230 V, 50/60 Hz|
|Gas connector||1/8” swagelok|
|Gasses||O2(99,6%) medical grade 2.6
Ar or He (99,998%) technial grade 4.8
|Gas pressure||2 – 3 Bar (30-45 psi)|
|Ambient temperature||5 – 35 °C (41 – 95 °F)|